Micro MinimOSD w/ KV Team Mod (Arduino / 1g / 15x15mm)

RCX08-105

New

This Micro MinimOSD is in 15x15mm size with about 1g of weight. It is extremely lightweight.

5 Items

Ready Stock

Rp 115.000,00

Upload Fonts to OSD
There is a nice customer told us to remind other customers that you can try to upload the fonts to OSD before configuration if you have a problem. Please watch the video below.

Features

  • All the same features as the orgnal, but less the half the size 
  • NO Dc/Dc convert . power board via 5 volts 
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two LED indicators
  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • 15x15MM Size!
  • Modifications for direct connection of two batteries (up to 4S)
  • Pad for an Analog or Digital PWM RSSI signal 
  • Pad for the connection of a Current Sensor
  • ATmega328P with Arduino bootloader
  • Standalone, or with APM/ Flip / Flip32+ flight controllers 
  • These modifications allow direct connection of two batteries (up to 4S)

Specification

  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two independent power sections with an LED indicator on each
  • Solder jumpers for combining the power sections
  • +5V 500mA regulator for up to +12V supply input
  • Solder jumper for PAL video option
  • Exposed test points for HSYNC and LOS
  • Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H

Package Included

  • 1 x Micro MinimOSD w/ KV Team Mod
  • 1 x Set Pin Headers

** It is not easy to use this DIY Micro MinimOSD (remember to upload the fonts before configuration) because you also need to solder pin headers by yourself. Please make sure you know how to use it. Youtube has many videos about this Micro OSD.

https://www.youtube.com/results?search_query=minimosd+micro

** You are recommended to use these normal size MinimOSDs because they are easier to use for beginners.

Warning: Due to many people do not know how to use this mini OSD, and would claim it does not work. But we confirmed they are working properly after we receive the OSDs back. All OSDs we ship are brand new without soldering. so we do not accept complaint for exchange/refund for this OSD without returning it back to us. You must return the OSD back to us on your own cost if you cannot make it to work for refund. Please accept this policy before you purchase. Thank you for your understanding.

No customer comments for the moment.

Write a review

Micro MinimOSD w/ KV Team Mod (Arduino / 1g / 15x15mm)

Micro MinimOSD w/ KV Team Mod (Arduino / 1g / 15x15mm)

This Micro MinimOSD is in 15x15mm size with about 1g of weight. It is extremely lightweight.

Top