This item is a RC model dedicated auxiliary controller,suitable for RC airplane and RC quadcopter
Warning: Last items in stock!
This item is a RC model dedicated auxiliary controller,suitable for RC airplane and RC quadcopter. It is used to control lighting, detection of low voltage, and could help to find out the airplane when the signal is lost.
Item Name: 3 in 1 multifunctional alarm
Power Supply: DC 5V
Test Battery Voltage Range: 2S - 3S,DC 6.8V - 12.6V
Low Voltage Detection Range: 3.4 V, 3.5 V, 3.6 V, 3.7 V (Settable)
Single LED Board Max. Power: 3W
LED Board Rated Working voltage: DC 12V
Machine Arm Light Flashing Type: Single-flash,two-flash,normally on,off
Can be turned on or turned off by remote control switch channels
- Machine Arm Light
Through the NLC LED button to control the flashing type.Each press changes once.
- Low Voltage Setting
Through the NLC BAT button to set the low power test voltage.Each press changes once.
- Through 4 LED light lighted to identify the setting voltage (1-3.4V,2-3.5V,3-3.6V.4-3.7V)
If NLC detected out that the monolithic voltage is lower than the set value, it will trigger a buzzer alarm.
- Finding Airplane Function
When the throttle signal loss or the throttle signal is maintained at the minimum for more than 30s,the controller will let out a shrill alarm.When you need to use this function,please turn off the transmitter first.Different transmitter has a different alarm waiting time.Almost all the equipment will alarm within 30s after the transmitter turn off,some will alarm immediately.
1x 3 In 1 Multifunctional Alarm
No customer comments for the moment.